As a home-owner, you might have noticed that stair treads are exactly the most exciting part of your house. However, they are vital for providing a safe and comfortable environment for your loved ones to live in. In this article, we will show you how to attach stair treads and get them looking great!
What is Stair Treads?
Stair treads are the basic elements of any staircase. They provide a surface for your foot to rest on as you walk up and down the stairs. They also keep people from falling off, especially when there is no handrail or railings present. You might have seen other materials used in place of wood for treads, such as plastic or vinyl. Know more about attaching stair treads at Unique Wood Products.
However, these materials can be slippery and have a tendency to damage the stairs when they get wet. Stair treads are usually made from wood, but you might also find them being used in concrete or steel constructions. Stair treads can be made from a variety of materials, including wood, concrete and steel.
Procedures for Attach Stair Treads
There are a few steps that you will need to follow in order to attach stair treads as follows:
- Cut the Treads: The first step is to cut the treads to fit your staircase. You will need to make sure that you measure carefully before cutting them, so that they are made at the right length and fit your stairs perfectly.
- Lay out the Treads: Once you have measured your treads, you will need to lay them out on the floor. This is important because it allows you to check that they are even and straight, which is necessary for your staircase to be properly installed.
- Install Treads: Now that you have made sure that your treads are all the same length and straight, you can install them on your staircase. The easiest way to do this is by using screws and nails.
- Brace the Top Tread: The top tread is the one that will be in contact with your step. You should brace this tread by using a piece of wood or metal, which you can then screw to the underside of your staircase.
- Install Bottom Tread: To install the bottom tread, place it on top of the top tread and attach it to the underside of your staircase using screws or nails.
- Secure Treads: Once you have installed all the steps, you will need to secure them by using a few screws in each one. These are usually located at either end of the step. You should also use a few screws to attach the treads to your staircase.
Consideration before Attaching Stair Treads
In order to avoid causing damage or even injury, you should always consider the following before attaching stair treads:
- When placing your staircase, make sure that it is secure and cannot be moved. You will also need to make sure that it is placed in a location where there are no loose items that could be knocked down by a person or object.
- Before you attach the treads, make sure that they are level and straight, as this will ensure that your staircase is secure and stable.
- When installing stair treads, it is important to use a hammer with rubber head. You should also use a level to ensure that the treads are level.
Conclusion
Attaching stair treads is a very important part of building a sturdy staircase. It’s crucial that you follow the instructions carefully and make sure you measure all the pieces correctly before starting the project.
Vivan Henderson, a professional photographer born in Texas. Photography is his passion. He was fond of nature in his childhood. So he took his passion as a profession. He is basically nature photographer but also take other type of photo. He completed graduation in computer science from Texas Tech University. He lives in Houston with his wife and two children’s.
